Air Handling Units (AHU)

An air handler, or air handling unit (often abbreviated to AHU), is a device used to regulate and circulate air as part of a heating, ventilating, and air-conditioning (HVAC) system.

CS3 SERIES 50/60 HZ Modular Central Station Air Handling Units Air Volume: 1000 to 56000 (1700 to 95000 m³/hr) Catalogue

RT Series-Roof

RT Series-Roof Mounted Air Handlers Air Volume: 2000 to 28800 cfm (3400 to 48950 m³/hr) Catalogue


HCB, VCB, VCB-FB Series 50Hz- Chilled water Air Handling Units Air Volume: 750 to 18700 cfm (1274 to 31775 m³/hr) Catalogue


Carpark Ventilation

Enclosed or underground car parks normally require ventilation systems to assist fire fighting operations. These systems generally also prevent the build-up of carbon monoxide during normal day-to-day use of the car park.
CFD Analysi
Jet Fans
Induction Fans
COOL Detectors
Axial Fans
Wall Mounted Fans
Centrifugal Fan SISW
Roof Top Fans


A Chiller is a machine that removes heat from a liquid via a vapor-compression or absorption refrigeration cycle. This liquid can then be circulated through a heat exchanger to cool equipment, or another process stream (such as air or process water).

Air Cooled Chillers

  • Industerial refrigeration rotary screw process chillers uses HCFC-22 & compatible with alternate refrigerants catalogue here
  • ACHDX series 50Hz - Air Cooled Screw Direct Expansion Chillers Cooling capacity: 55 to 245 Tons Catalogue here
  • ACS Series- Air Cooled Scroll Direct Expansion Chillers Cooling Capacity: 10 to 70 Tons Catalogue here
  • AFHX Series (Compact) - Air Cooled Screw flooded Chillers Cooling Capacity: 78 to 475 Tons Catalogue here
  • AFHX Series (High Ambient) - Air Cooled Screw Flooded Chillers Cooling Capacity: 78 to 472 Tons Catalogue here
  • AFVX Series (High Ambient) 50Hz- Air Cooled Screw Flooded Chillers Cooling Capacity: 85 to 445 Tons Catalogue here
  • AFVX Series- Air Cooled Screw Flooded Chillers Cooling Capacity: 85 to 521 Tons Catalogue here
  • AFVXB-5SR Series 50Hz- Air Cooled screw Chillers Cooling Capacity: 81 to 484 Tons Catalogue here
  • AFVX-E Series (High Ambient) 50Hz- Air Cooled screw Flooded Chillers Cooling Capacity: 85 to 481 Tons Catalogue here

Water Cooled Chillers

  • CENTRIFUGAL CHILLERS: DCLC Series 50Hz-Water Cooled Centrifugal Chillers Cooling Capacity: 300 to 1500 Tons Catalogue here Data Sheet here
  • HXWC Series- Water Cooled Screw Flooded Chillers Cooling Capacity: 200 to 740 Tons Catalogue here
  • WCFX Series- Water Cooled Screw Flooded Chillers Cooling Capacity: 55 to 301 Tons Catalogue here
  • WCFX-E Series 50Hz- Water Cooled Rotary Screw Water Chillers Cooling Capacity: 58 to 823 Tons Catalogue here
  • WCHDX Series 50Hz- Water Screw Direct Expansion Chillers Cooling Capacity: 52 to 196 Tons Catalogue here
  • WCOX Series 50Hz- Water Cooled Flooded Chillers With Horizontal Screw Compressors Cooling Capacity: 325 to 935 Tons Catalogue here
  • WCS Series 50Hz- Water Cooled Scroll Dirrect Expansion Chillers Cooling Capacity: 12 to 53 Tons Catalogue here
  • WXC Series- Water Cooled Screw Flooded Chillers Cooling Capacity: 63 to 195 Tons Catalogue here

Ecology Unit

Ecology Unit is an efficient & economical solution to exhaust contaminated air from kitchen hood. They are suitable for conveying kitchen exhaust air. The removal of grease from the exhaust air flow is a very important part of commercial kitchen operation.



  • Axial Fans
  • Wall Fans
  • Ducted Fans
  • Plastic Fans
  • Kitchen Fans
  • Radial Roof Fans
  • Smoke Extraction Fans
  • Anti Explosive Fans
  • Anti Corrosive Fans

Fan Coil Unit

A fan coil unit (FCU) is a simple device consisting of a heating and/or cooling heat exchanger or 'coil' and fan. It is part of an HVAC system found in residential, commercial, and industrial buildings.

  • Ducted FCU
  • Hi Wall Mounted
  • Ceilling Mounted
  • Six Way Cassette
  • Four Way Cassette
  • Two Way Cassette
  • One Way Cassette
  • Electric Heater
  • Drain Pump

Fan Coil Unit Hookup

  • Set of Valve
  • 2 Way Control Valve
  • Strainer
  • Balance Valve
  • Flexible Connection
  • Unions
  • Pressure Independent
  • Control Valve

Fuel Systems

The fuel system is made up of the fuel tank, pump, filter, and injectors or carburetor, and is responsible for delivering fuel to the engine as needed. Each component must perform flawlessly to achieve expected vehicle performance and reliability
  • Underground main fuel tanks
  • Fuel dispenser for diesel fuel type and for gasoline
  • Main control panel
  • Double containment fuel pipe
  • Network - Carboon stell / FRP
  • PremaPipe - USA
  • Tanks and pipes fuel
  • Accessories Control

Pre-insulated Piping

Insulated pipes (called also preinsulated pipes or bonded pipe) are widely used for district heating and hot water supply in Europe. They consist of a steel pipe, an insulating layer, and an outer casing

Pre-insulated Pipes

Double Containment Pipes

Leak Detection Systems

Pipeline leak detection is used to determine if and in some cases where a leak has occurred in systems which contain liquids and gases. Methods of detection include hydrostatic testing, infrared, and laser technology after pipeline erection and leak detection during service.

Stress Analysis

Is an engineering discipline that uses many methods to determine the stresses and strains in materials and structures subjected to forces. In continuum mechanics, stress is a physical quantity that expresses the internal forces that neighboring particles of a continuous material exert on each other, while strain is the measure of the deformation of the material.

Seamless Steel

Seamless Steel Pipe is made from a solid round steel ‘billet’ which is heated and pushed or pulled over a form until the steel is shaped into a hollow tube. Billets are procured both from indigenous suppliers and from abroad.

Electric Resistance Welding

Refers to a group of welding processes such as spot and seam welding that produce coalescence of faying surfaces where heat to form the weld is generated by the electrical resistance of material combined with the time and the force used to hold the materials together during welding.

Spiral Submerged Arc Welding (SSAW)

Valves, Dampers and Terminal Unit Control

  • Fire and Smoke Damper
  • Blast Valve
  • Blast Damper
  • Inert Gas Damper
  • Electric Heater
  • CAV
  • VAV
  • Plastic Air Outlets

EGEMECH Is an Electromechanical Egyptian shareholding company and we are now the authorized distributors for DUNHAM BUSH, DYNAIR and ATS.

Ahmed Fakhry St.
Nasr City, Cairo,
Egypt - 12559

8.00 AM - 6:00PM